FIR 1 - INSPECTION REPORT

Permit Holder:	Standard Oil Co of LA			Well Name/No:	Umsted, Sid	Permit:	4365
Lease Name:	Umsted, Sid 23	Sec:	32	Twp:	15S	Range	15W
GPS Well Location:		Latitude:	33.37624	Longitude:	-92.67426	Field:	WILDCAT
Lease/Tank Battery:		Latitude:	0	Longitude:	0	County:	OUACHITA
Entrance from nearest 911 address, public street or highway

Status:

Completing New not producing Operating Old not producing Not found

Single well pad Mutiple well pad NA

Well equipment operational:	Equipment plumbed properly:	Excess equipment on lease:
Yes No NA	Yes No NA	Yes No

Signs:

At lease entrance:

Yes No

At tank battery:

Yes No NA

At well:

Yes No NA

Signage compliance:

Yes No

Tank Containment:

Earthen Metal ring Tank in tank No Tanks Other

Dimensions:

Length:

0

Width:

0

Diameter:

0

Height:

0

Capacity (bbls):

0

Capacity compliance:		Breaches/Erosion:		Excessive vegetation present:			Compliance agreement:
Yes No NA		Yes No NA		Yes No NA			Yes No NA

Containment Conditions:

Fluids Present:

Yes No

Produced fluids Storm water Waste oil NA Other

Well Site Compressor:

Yes No

Is it in compliance?

Yes No NA

Trash/Debris:	Yes No	Use as storage area:	Yes No	Unusual equipment:	Yes No	Excessive erosion:	Yes No
If yes to any, explain:

Entry Gate Present:

Yes No

Gate locked on arrival:

Yes No

Gate locked on departure:

Yes No

Is spill or discharge of drilling, completion or produced fluids present:					Yes No
If yes, did spill or discharge of drilling, completion or produced fluids occur or travel off the well pad:								Yes No NA	(If yes, complete FIR 5)
Compliance Summary Remarks:
Checked the well this morning after installing the first plug and still no flow coming up out of well bore. Started in at 0730hrs to tag the plug to verify the depth of it. Tagged top of the plug at 2315ft. Added water to well and lost 2bbls. Started in with the 2nd plug(cement) at 0925hrs. Put in 30 sacks of cement from 2315ft to 2100ft. Pulled up 6 joints of tubing and reversed water flow to wash out the tubing. During the process of adding cement and reversing the water flow there was back flow coming up to the surface outside of the 24" caisson. It did stop immediately after stopping the water flow. Added water after pulling joints up to 1250ft and lost 3bbls. We let the cement set up from 1000hrs to 1400hrs. Went back in and tagged up on the 2nd plug at 2121ft at 1435hrs. Put in 30 sacks of cement from 2121ft to 1900ft at 1515hrs. Pulling out tubing and left 36 joints in the well. Closed the ram and the valve on the tubing and will tag again tomorrow.

Inspected by:	GLEN OWENS				Date:  6/9/2022 5:22:00 PM
Review for NNC or NOV:	Yes No	If yes, check one	NNC NOV DNI NA	Ref #:	Date: __________
ADEQ referral:	Yes No	Date of referral:  __________